IEEE 802.3: Ethernet Media Access Control (MAC) protocol IEEE 802.3i: 10BASE-T Ethernet IEEE 802.3u: 100BASE-TX fast Ethernet IEEE 802.3ab: 1000BASE-T gigabit Ethernet IEEE 802.3z: 1000BASE-X gigabit Ethernet fiber IEEE 802.3ad: comply link aggregation standard IEEE 802.3x: flow control IEEE 802.1p: About the traffic priority of the second layer of QoS / Cos protocol (multicast filtering) IEEE 802.1q: VLAN Bridge operation IEEE 802.1d: STP spanning tree IEEE 802.1s: MSTP spanning tree IEEE 802.1w: RSTP spanning tree
PoE
PoE Standards: IEEE 802.3af/at PoE Capable Ports: Port 1-8 can support up to 250m @10Mbps with Extend Enable Power Budget: 96W (30W max. per port)
Uplink Port Settings
From Port: Specifies the start port in the range for Uplink Ports. These are used for connecting the surveillance VLAN with other switches. To Port: Specifies the end port in the range for Uplink Ports. These are used for connecting the surveillance VLAN with other switches
Network Cables
UTP Cat. 5, Cat. 5e (100 m max.)
Duplex Mode
Full/Half-duplex for 10/100 Mbps Full duplex for 1000 Mbps
Performance
Switching Capacity: 20 Gbps Transmission Method: Store-and-forward MAC Address Table: 8K entries Maximum 64 Byte Packet Forwarding Rate: 14.88 Mpps
LED’s
Power: ✓ System: ✓
Physical/Environmental
Power Input: DC:12V 1A Operating Temperature: 0°C ~ 50°C Storage Temperature: -40°C to 70°C Operating Humidity: 10% to 95% relative humidity no condensation Storage Humidity: 5% to 90% relative humidity no condensation Dimensions (L x W x H): 225 x 120 x 35 mm